[ Page 5 of 6 ]

Advertising supplement provided by Sto Corp.

Table 1D—EIFS and Air/Moisture Barrier Fire Performance Test Method Criteria 1. Fire Endurance ASTM E119 Maintain fire resistance of existing rated assembly 2. Intermediate Scale Multi-Story Fire Test UBC Standard 26-4 or 26-9 1 1. Resistance to vertical spread of flame within the core of the panel from one story to the next     2. Resistance to flame propagation over the exterior surface     3. Resistance to vertical spread of flame over the interior surface from one story to the nex     4. Resistance to significant lateral spread of flame from the compartment of the fire origin to adjacent spaces 3. Radiant Heat Ignition 1996 National Building Code, Section 1406.0 (NFPA 268) No ignition @ 20 minutes   1997 Standard Building Code, Section 2603.4.7 (NFPA 268) No ignition @ 20 minutes

Table 1E—Component Fire Performance Test Method Criteria Surface Burning ASTM E 84 Insulation board and reinforced coating system shall each have a flame spread of 25 or less, and smoke developed of 450 or less

Table 1F—Impact Resistance Performance Test Method Criteria 1. Impact Resistance EIMA 101.86 Level 1: 25-49 in-lbs (2.83-5.54 J)     Level 2: 50-89 in-lbs (5.65-10.1 J)     Level 3: 90-150 in-lbs (10.2-17 J)     Level 4: >150 in-lbs (>17 J)

Table 1G—Structural Performance Test Test Method Criteria 1. Wind Load ASTM E-330 Withstand negative and positive wind loads required by prevailing building code